Microscale Combustion Calorimeter

• Micro-scale Combustion Calorimeter (MCC), sometimes referred to as Pyrolysis Combustion Flow Calorimetry (PCFC), measures the rate at which the heat of combustion of fuel gases are released by a solid during controlled pyrolysis in an inert gas stream
• The instantaneous heat of combustion of the flowing gas stream is measured by oxygen consumption calorimetry
• Only 0.5 to 50 milligrams of sample is needed and results are obtained in minutes, instead of hours or days of testing and analysis
• The test apparatus provides a wealth of information on the fire hazard of a material

Click here for more information

Are your laboratory capabilities over capacity?

Do you need added throughput for sample testing?

RT Instruments, Inc. is here to help quick and efficient turn-around!

RT Instruments, Inc. has commissioned several Thermal, Rheology, FTIR, GC/MS, UV/VIS, HPLC, Karl Fisher, Ion Chromatography, Accelerated Rate Calorimeter, Laser Defractive Particle Size instruments to help you catch up or just get ahead.

Whether it be QA, Research Discovery, etc., we can help!

Contact RT Instruments, Inc. for details

Project or batch pricing also available

Features

• Large 5’’ 800×480 pixel touchscreen display
• Level indicator and adjustable feet ensure proper balance
  setup for optimum weighing results
• RS-232 interface is available to provide speedy connection
  to computers and printers
• USB host for memory card and USB I/O interface
• Built-in memory for storing products and settings
• Printouts include date and time for data tracking within
  Good Laboratory Practices (GLP) guidelines
• Multilingual display permits use in various regions
• Checkweighing with audible alarm

General Specifications

• Weighing units: g, mg, ct, GN, lb, oz, dwt, mm, ozt, tl.H, tl.S, tl.T, T, custom unit
•  Interface: RS-232 / USB
•  Power Supply: 24V 50/60Hz 500mA adapter
•  Display: Touchscreen with 4.9″/ 125mm -high digits
•  Calibration: Internal automatic calibration / External calibration
•  Housing: ABS plastic
•  Operating Temperature: 10° to 30°C / 50° to 86°F

Applications

• Checkweighing
• Parts Counting
• Density Determination
• Percentage Weighing
• Statistics
• Dynamic/Animal Weighing
• Formulation
• Weighing
• Textile

Features

•  High-resolution graphic display
• Level indicator and adjustable feet ensure proper
  balance setup for optimum weighing results
• RS-232 interface is available to provide speedy
  connection to computers and printer
• Printouts include date and time for data tracking
  within Good Laboratory Practices (GLP) guidelines
• Multilingual display permits use in various regions
• Checkweighing with audible alarm

General Specifications

• Weighing units: g, mg, lb, oz, ct, GN, dwt, mm, ozt, T, tl.H, tl.S, tl.T, custom unit
•  Interface: RS-232
•  Power Supply: 24V 50/60Hz 500mA adapter
•  Display: Graphic display with 0.6″ -high digits
•  Calibration: Internal automatic calibration / External calibration
•  Housing: ABS plastic
•  Operating Temperature: 10° to 30°C / 50° to 86°F

Applications

• Checkweighing
• Parts Counting
• Density Determination
• Percentage Weighing
• Dynamic/Animal Weighing
• Formulation/Recipe
• Weighing

Thickness Gauge EV 01

The EV 01 Thickness Gauge is intended for rubber or plastic thickness measurement according to ISO 23529 and compression set measurement according to ISO 815.

The following thickness gauges can be supplied

Thickness Gauge EV 06

The EV 06 Thickness Gauge is intended for textile thickness measurement according to ISO 5084. Available in two versions: EV 06A 0,1 and EV 06B.

The following thickness gauges can be supplied

Pneumatic Thickness Gauge EV 07B

The EV 07B Pneumatic Thickness Gauge is intended for textile thickness measurement according to ISO 5084.

The following thickness gauges can be supplied

Oxygen Index Module

• Digital touchscreen display showing oxygen concentration, gas flow rate through the chimney, chimney temperature and lapsed time during the test
• Oxygen concentration selected and instrument adjusts automatically
• AutoCal facility calibrates zero and span range totally automatically
• Fast response O2 transducer accurate to +/- 0.1 %

Click here for more information

Temperature Index Module

• The Temperature Index extends the range of the Oxygen Index Module, so that the oxygen index of materials can be measured at elevated temperatures
• Generally, the oxygen index falls as the gas mixture is heated, so work at elevated temperatures supplements work carried out at room temperature
• This new model utilises the very latest control technology.
• Selection of all variable elements is by easy to use touchscreen and the intelligent system adjusts accordingly
• This differs from most competitive products, where valves need to be adjusted manually, which is a time consuming and a tedious task

Click here for more information

NBS Smoke Chamber

• Intelligent ‘hot swappable’ design, conforming to BS6401/ASTM E662 and ISO5659-2, or available configured to either test arrangement
• Vertical orientation is used for FAA testing
• ISO 5659-2 horizontal configuration used in new marine and railway applications
• Can be utilised for toxicity measurements according to the latest Boeing and Airbus test standards, including AITM 3.0005 issue 2
• Digital PMT light measurement system
• User-friendly, customer-configurable Windows 10 software

Click here for more information

Cone Calorimeter

• Weighing system: resolution better than +/-0.01
• Computerized calibration of O2, CO/CO2 analyzer together with hydrocarbon measurement
• Stores preset heat flux levels and can send them to the controller for testing at various levels
• Brings together the analyzer and DAQ components into a single package
• Windows 10 computer with 27” HD Monitor
• During test, all data channels are displayed together with elapsed time, ignition, flameout, rate of heat release and time averaged heat release, smoke level and duct flow

Click here for more information

Horizontal Flammability Chamber

• Bespoke ignition source according to ISO 3795
• Automatic starting of test when sample holder is placed in test position
• Selectable and automated flame application time
• Enables ‘after flame’ and ‘dripping’ timings to be recorded
• Also complies with FMVSS 302 automotive testing
• Can be used for non-certified FAR horizontal flammability testing

Click here for more information

Ignitability Chamber

• EN ISO 11925-2 is relevant to material classes C, D and E for Euroclass testing
• All high-quality stainless-steel construction throughout
• External burner positioning from front
• External lateral positioning of specimen holder during testing, also from front
• Bespoke ignition source according to the above standard
• Also complies with DIN 4102 Part 1 class B2 small burner test and NF P 92-504.

Click here for more information

FAA 4C Flammability Chamber

• Test chambers according to FAR Part 25; vertical, horizontal, 45°/60° tests
• Stainless steel construction
• Adjustable burner position from front
• Automatic starting of test when burner is placed in test position
• Selectable and automated flame application time
• Enables ‘after flame’ and ‘dripping’ timings to be recorded

Click here for more information

UL94 Flammability Chamber

• Conforms to UL94 and IEC requirements for the classification of plastics
• Draft free chamber with a volume greater than 1m3
• Integral comprehensive control panel
• ASTM D5025 burner with wing tip and adjustable burner angle
• Ergonomically designed access ports for sample and burner positioning
• Large counterbalanced sliding door allowing complete access
• Can be customised to include other tests such as FAR Part 25

Click here for more information

Vertical Textile Testing Apparatus 

• Conforms to EN ISO6940 and 6941 tests and measures the rate of flame spread for vertically oriented samples
• High-quality stainless-steel construction throughout
• Fully compliant burner, complete with needle control valve
• Semi-automatic control of flame application time and thread switches/timers
• Electronic gas safety control and emergency stop switch
• Ergonomically designed ensure testing is as user friendly as possible
• Other test methods possible on the apparatus, such as the BS 5867/5438, EN71-2 etc. with the purchase of additional templates and sample holders

Click here for more information

Toy Flammability Tester

• High-quality stainless-steel construction throughout
• Fully compliant burner, complete with needle control valve
• Semi-automatic control of flame application time and thread switches/timers
• Electronic gas safety control and emergency stop switch
• Ergonomically designed ensure testing is as user friendly as possible
• Other test methods possible on the apparatus, such as ISO 6940 and ISO 6941, BS 5867/5438. with the purchase of additional templates and sample holders
• Conforms to EN 71-2 and measures the rate of flame spread for vertically oriented samples

Click here for more information

Radiant Flooring Apparatus

• Stainless steel lined and insulated chamber
• Double-acting pneumatic horizontal and rotational position of burner, complete with adjustable position sensors
• Gas and Air mass flow controllers for precise computer-controlled burner gas flow
• Automatic test start on sensing inner door closure
• Large 24” monitor and Windows 10 Pro PC
• Software control of testing including auto start, variable flame application time, auto burner withdrawal and integrated video option

Click here for more information