Product Details

Gabometer


Click to Zoom

Qty:    

GABOMETER® 2000 and 4000 – The Intelligent Universal Flexometer

 


GABOMETER®
  • Sample testing can be done according to the following standards:
    - DIN 53 533
    - ASTM D 623
    - ISO 4666/3
    - ISO 4666/4
    - BS 903 part A50
    - JIS K 6265
  • Compression test according to Goodrich
    (Goodrich Flexometer))
  • Heat Build-up Test
  • Blow Out Test
  • Thermal Set
  • Static and dynamic load on the sample at the Heat Build-up test
  • Dynamic visco-elastic properties (optional)
  • Tension Flexometer Tests (optional)
  • Fatigue Tests (optional)
  • Programmable generator card for variable waveforms with automatic self-adjusting signal shape feedback loop (optional)
  • Creep Tests (optional)
  • Triple Temperature Measurement (option):
    - Thermosensor at the bottom of the samplee
    - Thermosensor within the centre of the sample   (needle type)
    - Thermosensor for chamber control
   
     

Compression testing device equipped with isolated temperature measuring unit for In Vivo recording of the sample temperature during the heat build-up test 		 
Automatic Sample Supply System (ASSS)
- Option -
 

Temperature measurement within the centre of the test specimen by needle thermocouple. Software Controlled Automatic Pneumatic Driving System - Option -		  
Compression magazine for rubber samples. A robot grip system takes the samples from the magazine and feeds the GABOMETER® .
 
Specification GABOMETER® 2000 GABOMETER® 4000
Test specimen size:
Diameter
Length
17.8 mm
25.0 mm
30 mm (<40 mm optional)
25 mm
Frequency range 30 Hz
0.1 Hz up to 50 Hz continuously
(Option)		 30 Hz
0.1 Hz up to 50 Hz continuously
(Option)
0.1 Hz up to 100 Hz continuously
(Option)
Static strain range up to 15 mm
up to 50 mm (Option)		 up to 15 mm
up to 50 mm (Option)
Dynamic strain range up to ±3.3 mm
up to ±5.0 mm (Option)		 up to ±3.3 mm
up to ±5.0 mm (Option)
Force range up to 2500 N up to 5000 N
Load mode according to DIN 53 533, ASTM D 623, ISO 4666/3, ISO 4666/4,
BS 903 part A50, JIS K 6265
  1. Constant strain amplitude mode with amplitude of up to ±3.3 mm
2. Constant stress amplitude mode with amplitude of up to ±1500 N
   (up to ±1000 N with GABOMETER® 2000)
 
Temperature range RT up to 300°C RT up to 300°C
-150 °C up to 500 °C (Option)
Measurement Temperature rise of the test specimen
Thermal Set
Energy loss
Viscoelastic properties
(E', E'', tan delta, E*)

Option
Option