Product Details

Gabo Eplexor


Click to Zoom

Qty:    

 

The EPLEXOR® 2000 N and 4000 N systems combine the dynamic mechanic thermal analysis with the dynamic material testing for the determination of the absolute values of the E modulus.

Further fields of application are:
  • DMA/DMTA/DMTS
  • Dynamic component testing
  • Durability tests
  • Analysis of the visco-elastic material properties
  • Dynamic fatigue testing
  • Relaxation and retardation
    - creep testing – (optional)
  • Tests in liquids (optional))
  • Tests among UV light (optional)
  • Tests in humid atmosphere (optional)
  • Prediction of application properties
  • Materials research
  • Impact tests
The upgradable Automatic Sample Supply System (ASSS) with a sample dimension measurement station guarantees a best possible sample capacity during investigations in the entire temperature range of -150 °C to 500 °C (option).

CHARACTERISTICS:

The only DMTS system with two independent drives for the static and dynamic load.

A static load up to 4000 N is possible, a dynamic drive up to ±2500 N. The large high force capacity enables compression and shear tests on Dumbell specimen.

Through the higher force range it is especially applicable for curable plastics, composites or elastomers.

It is a high force system for the determination of non-linear mechanical characteristics of stiff (reinforced) materials.

Heat build-up tests with high deformation amplitudes on components are possible.

A premium system in its class.
 
  • Absolute values of deformation, force, initial sample length L00 and temperature.
  • Determination of the following material properties: E’, E”, G’, G”, η”, η’, tan delta
    (depends on the used sample holder).
  • Storage of the raw data.
  • Dynamic testing of polymers, elastomers, caoutchoucs, rubbers, biological materials, glasses, ceramics, metals, foils, fibres, tyre cords, resins, adhesives, prepregs, composites, lacquers, coatings, food-stuffs, pharmaceuticals and much more.
  • Changeable force transducers.
  • Changeable sample holders.
  • Automatic Sample Supply System (ASSS) for tension, compression and bending samples within the entire temperature range, including sample dimension determination (option).
  • Simultaneous DMA/DMTS and TMA application.
  • Control and measurement analysis, alternatively in the procedure of FFT (Fast Fourier Transformation), Least Square Fit or hysteresis.
  • Time, temperature, superposition (mastercurves) - WLF, Arrhenius, numerical methods.
  • Extensive software package (data and curve analysis), spline functions, 3D-plots and Cole-Cole diagrams.
  • Predictive testing for the simulation of the rolling resistance on automobile tires.
  • Components testing.
  • Dumbell durability tests.
  • Heat build-up tests but with restricted force and deformation range.
Specifications
EPLEXOR® 2000 N
Force range Dyn. strain Stat. strain Frequency range Temperature
±1000 N (2000 N)** ±1.5 mm (3 mm)* up to 35 mm 0.01 Hz - 100 Hz RT to 500 °C
         
Optional Optional   Optional Optional
static 2500 N ±5 mm*   0.001 Hz - 200 Hz RT to 1000 °C
RT to 1500 °C
-150 °C to 500 °C
*The max. elongation depends on the sample, sample holder and frequency. **Peak force

EPLEXOR® 4000 N
Force range Dyn. strain Stat. strain Frequency range Temperature
±1500 N (3000 N)** ±1.5 mm (3 mm)* up to 3 mm 0.01 Hz - 100 Hz RT to 500 °C
         
Optional Optional   Optional Optional
static 5000 N ±5 mm*   0.001 Hz - 200 Hz RT to 1000 °C
RT to 1500 °C
-150 °C to 500 °C
*The max. elongation depends on the sample, sample holder and frequency. **Peak force